{"product_id":"audi-e-tron-gt-air-suspension-lowering-links","title":"BAAN Air Suspension Lowering Links for Audi e-tron GT","description":"\u003cp\u003e\u003cstrong\u003eBAAN Air Suspension Lowering Links for Audi e-tron GT\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Audi e-tron GT equipped with factory adaptive air suspension.\u003c\/p\u003e\u003cp\u003eWheel fitment on the Audi e-tron GT looks most coherent when the body sits at the correct visual height. This mechanical BAAN solution allows you to tighten the relationship between the low body, wheel arches and wheel setup without adding an electronic controller.\u003c\/p\u003e\n\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel-specific starting dimensions\u003c\/strong\u003e rather than a universal one-size-fits-all link.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndependent axle setup\u003c\/strong\u003e for a balanced front-to-rear stance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision-machined construction\u003c\/strong\u003e with critical dimensions checked using 0.001 mm-resolution measuring equipment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect sensor-ball fitment\u003c\/strong\u003e with stainless-steel sockets and safety-retaining clips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMechanical, reversible operation\u003c\/strong\u003e without adding a signal-interception module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the Audi e-tron GT, the most convincing result is usually not the lowest possible setting but a measured position that preserves clearance and suspension travel. The adjustable construction supports that approach.\u003c\/p\u003e\n\u003ch2\u003eTechnical data for the e-tron GT\u003c\/h2\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBAAN part category\u003c\/th\u003e\n\u003ctd\u003eAdjustable ride-height sensor links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVehicle platform\u003c\/th\u003e\n\u003ctd\u003eAudi e-tron GT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCentral adjuster\u003c\/th\u003e\n\u003ctd\u003eKnurled machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBall-joint connection\u003c\/th\u003e\n\u003ctd\u003eStainless-steel sockets for the factory sensor balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdjustment method\u003c\/th\u003e\n\u003ctd\u003eRotate the centre section while installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecuring method\u003c\/th\u003e\n\u003ctd\u003eLock nuts and two safety-retaining clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoding\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReversibility\u003c\/th\u003e\n\u003ctd\u003eOriginal links can be refitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eProduction dimensions are checked with precision equipment with a display resolution of 0.001 mm.\u003c\/p\u003e\n\u003ch2\u003eAdjusting front and rear ride height\u003c\/h2\u003e\u003cp\u003eRide height is continuously adjustable rather than limited to a fixed drop. The normal working range is from close to the original setting to approximately 50 mm lower on the front and rear axles.\u003c\/p\u003e\n\u003cp\u003eThe selected stance should be based on real measurements after the air suspension has settled in its normal road mode.\u003c\/p\u003e\n\u003ch2\u003eOperating principle\u003c\/h2\u003e\u003cp\u003eThe product works at the point where suspension movement is translated into sensor movement. By recalibrating that relationship mechanically, the e-tron GT can sit lower while continuing to use its standard suspension interface and self-levelling logic.\u003c\/p\u003e\n\u003ch2\u003eWhat arrives in the box?\u003c\/h2\u003e\u003cp\u003eYou receive a complete model-specific kit for both axles. No separate electronic controller is needed. Reuse of the original sensor balls is part of the direct-fit installation.\u003c\/p\u003e\n\u003ch2\u003eFitment requirements\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory adaptive air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003ee-tron GT\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003eCorrect installation procedure\u003c\/h2\u003e\u003cp\u003eAllow approximately 60–90 minutes for installation and initial setup. After the first road test, remeasure the vehicle on a flat surface and confirm that the selected height is even from left to right.\u003c\/p\u003e\u003cp\u003eFor vehicles with large aftermarket wheels, also check inner tyre clearance at steering lock and under compression before selecting the final height.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eCan the height be adjusted without removing the links?\u003c\/h3\u003e\u003cp\u003eYes. Opposing left-hand and right-hand threads allow the centre adjuster to be rotated while both sockets remain connected to the vehicle.\u003c\/p\u003e\u003ch3\u003eDoes the kit require coding?\u003c\/h3\u003e\u003cp\u003eNo. The ride-height change is created mechanically and does not require software coding or an electronic lowering module.\u003c\/p\u003e\u003ch3\u003eWill the original suspension modes remain available?\u003c\/h3\u003e\u003cp\u003eYes. The factory controls and selectable suspension modes remain available, although the vehicle operates around the newly selected static height.\u003c\/p\u003e\u003ch3\u003eShould the alignment be checked?\u003c\/h3\u003e\u003cp\u003eYes. A wheel-alignment check is recommended after the vehicle has settled, particularly with a larger drop or non-standard wheels.\u003c\/p\u003e\u003ch3\u003eCan the original height be restored?\u003c\/h3\u003e\u003cp\u003eYes. The links can be readjusted and the original factory links can also be reinstalled.\u003c\/p\u003e\n\u003ch2\u003eBAAN Lowering Links\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the e-tron GT kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007476666699,"sku":"BAAN-LL-SET-x-Audi-e-tron-GT","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/airmatic-suspension-lowering-links_404394dc-c787-4011-8527-a5652b6263eb.webp?v=1785554299","url":"https:\/\/baanvelgen.com\/products\/audi-e-tron-gt-air-suspension-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}