{"product_id":"bentley-flying-spur-gen-3-air-suspension-lowering-links","title":"BAAN Air Suspension Lowering Links for Bentley Flying Spur Gen 3","description":"\u003cp\u003e\u003cstrong\u003eBAAN Air Suspension Lowering Links for Bentley Flying Spur Gen 3\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Bentley Flying Spur Gen 3 equipped with factory air suspension.\u003c\/p\u003e\u003cp\u003eThe Bentley Flying Spur Gen 3 combines a four-door luxury saloon body with an adjustable factory suspension system. BAAN Lowering Links let the owner balance the long wheelbase and substantial body with a more composed ride height.\u003c\/p\u003e\n\u003ch2\u003eA lower stance for a four-door luxury saloon\u003c\/h2\u003e\u003cp\u003eThe vehicle-specific starting dimensions are intended to simplify installation. Final measurements should still be taken at all four wheel arches because production tolerances and vehicle equipment can influence the measured result.\u003c\/p\u003e\n\u003ch2\u003ePrecision adjustment rather than a fixed drop\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable front range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable rear range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eA conservative OEM+ setting normally leaves more suspension travel and ground clearance than the maximum position. Always verify tyre, underbody and sensor-link clearance.\u003c\/p\u003e\n\u003ch2\u003eMechanical sensor geometry explained\u003c\/h2\u003e\u003cp\u003eAt each sensor location, the original fixed linkage is exchanged for an adjustable one. A carefully measured change in length produces a corresponding change in static body position. Reinstalling the factory links restores the original mechanical reference.\u003c\/p\u003e\n\u003ch2\u003eConstruction quality\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDeveloper\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBaanVelgen, Rotterdam, the Netherlands\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eManufacturing\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTaiwan, to BaanVelgen specifications\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eAdjuster material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePrecision-machined aluminium\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eConnection material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCorrosion-resistant stainless steel\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eThread arrangement\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLeft-hand and right-hand threads in one turnbuckle-style assembly\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eRetention method\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLock nuts plus dual metal safety clips\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eElectronic modification\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNone required\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003ch2\u003eKey functions\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eAdjustable mechanical ride-height control for the front and rear axles.\u003c\/li\u003e\n  \u003cli\u003eTurnbuckle-style centre sections that can be adjusted while the sockets remain connected.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel ball-joint sockets intended for exposed suspension locations.\u003c\/li\u003e\n  \u003cli\u003eMechanical locking on both sides of each centre adjuster.\u003c\/li\u003e\n  \u003cli\u003eRetention of the factory self-levelling interface and selectable suspension controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication details\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFlying Spur Gen 3\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003ePackage contents\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eFront axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003eRear axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003ePreassembled connection sockets and safety clips\u003c\/li\u003e\n  \u003cli\u003eAdjustment and installation information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eA professional or experienced installer can normally fit the set in about 60–90 minutes. Work on a level surface, follow the vehicle manufacturer’s air-suspension lifting procedure and avoid applying leverage to the original plastic sensor arms.\u003c\/p\u003e\u003cp\u003eThe final setup should be checked in the normal road mode and with normal tyre pressures. Reinspect the lock nuts and safety clips after the first period of use.\u003c\/p\u003e\n\u003ch2\u003eOwner questions\u003c\/h2\u003e\u003ch3\u003eCan the height be adjusted without removing the links?\u003c\/h3\u003e\u003cp\u003eYes. Opposing left-hand and right-hand threads allow the centre adjuster to be rotated while both sockets remain connected to the vehicle.\u003c\/p\u003e\u003ch3\u003eDoes the kit require coding?\u003c\/h3\u003e\u003cp\u003eNo. The ride-height change is created mechanically and does not require software coding or an electronic lowering module.\u003c\/p\u003e\u003ch3\u003eWill the original suspension modes remain available?\u003c\/h3\u003e\u003cp\u003eYes. The factory controls and selectable suspension modes remain available, although the vehicle operates around the newly selected static height.\u003c\/p\u003e\u003ch3\u003eShould the alignment be checked?\u003c\/h3\u003e\u003cp\u003eYes. A wheel-alignment check is recommended after the vehicle has settled, particularly with a larger drop or non-standard wheels.\u003c\/p\u003e\u003ch3\u003eCan the original height be restored?\u003c\/h3\u003e\u003cp\u003eYes. The links can be readjusted and the original factory links can also be reinstalled.\u003c\/p\u003e\n\u003ch2\u003eDirect BAAN supply\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the Flying Spur Gen 3 kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007477813579,"sku":"BAAN-LL-SET-x-Bentley-Flying-Spur-Gen-3","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-links_79918783-640e-4866-9000-e23b94411951.webp?v=1785554328","url":"https:\/\/baanvelgen.com\/products\/bentley-flying-spur-gen-3-air-suspension-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}