{"product_id":"mercedes-benz-cls-c257-airmatic-lowering-links","title":"BAAN AIRMATIC Lowering Links for Mercedes-Benz CLS C257","description":"\u003cp\u003e\u003cstrong\u003eBAAN AIRMATIC Lowering Links for Mercedes-Benz CLS C257\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Mercedes-Benz CLS C257 equipped with factory AIRMATIC air suspension.\u003c\/p\u003e\u003cp\u003eFor the Mercedes-Benz CLS C257, ride height has a major influence on how the body and wheel package read as one design. This BAAN kit is intended to reinforce the sweeping C257 silhouette with a lower, more continuous body-to-wheel line.\u003c\/p\u003e\n\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel-specific starting dimensions\u003c\/strong\u003e rather than a universal one-size-fits-all link.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndependent axle setup\u003c\/strong\u003e for a balanced front-to-rear stance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision-machined construction\u003c\/strong\u003e with critical dimensions checked using 0.001 mm-resolution measuring equipment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect sensor-ball fitment\u003c\/strong\u003e with stainless-steel sockets and safety-retaining clips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMechanical, reversible operation\u003c\/strong\u003e without adding a signal-interception module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe vehicle-specific starting dimensions are intended to simplify installation. Final measurements should still be taken at all four wheel arches because production tolerances and vehicle equipment can influence the measured result.\u003c\/p\u003e\n\u003ch2\u003eTechnical data for the CLS C257\u003c\/h2\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBAAN part category\u003c\/th\u003e\n\u003ctd\u003eAdjustable ride-height sensor links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVehicle platform\u003c\/th\u003e\n\u003ctd\u003eMercedes-Benz CLS C257\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCentral adjuster\u003c\/th\u003e\n\u003ctd\u003eKnurled machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBall-joint connection\u003c\/th\u003e\n\u003ctd\u003eStainless-steel sockets for the factory sensor balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdjustment method\u003c\/th\u003e\n\u003ctd\u003eRotate the centre section while installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecuring method\u003c\/th\u003e\n\u003ctd\u003eLock nuts and two safety-retaining clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoding\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReversibility\u003c\/th\u003e\n\u003ctd\u003eOriginal links can be refitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eProduction dimensions are checked with precision equipment with a display resolution of 0.001 mm.\u003c\/p\u003e\n\u003ch2\u003eAdjusting front and rear ride height\u003c\/h2\u003e\u003cp\u003eRide height is continuously adjustable rather than limited to a fixed drop. The normal working range is from close to the original setting to approximately 50 mm lower on the front and rear axles.\u003c\/p\u003e\n\u003cp\u003eThe selected stance should be based on real measurements after the air suspension has settled in its normal road mode.\u003c\/p\u003e\n\u003ch2\u003eOperating principle\u003c\/h2\u003e\u003cp\u003eThe product works at the point where suspension movement is translated into sensor movement. By recalibrating that relationship mechanically, the CLS C257 can sit lower while continuing to use its standard suspension interface and self-levelling logic.\u003c\/p\u003e\n\u003ch2\u003eWhat arrives in the box?\u003c\/h2\u003e\u003cp\u003eYou receive a complete model-specific kit for both axles. No separate electronic controller is needed. Reuse of the original sensor balls is part of the direct-fit installation.\u003c\/p\u003e\n\u003ch2\u003eFitment requirements\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory AIRMATIC air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLS C257\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003eCorrect installation procedure\u003c\/h2\u003e\u003cp\u003eThe links are a direct sensor-link replacement and generally require around 60–90 minutes to install. Record the wheel-centre-to-arch measurements, begin from the supplied baseline and make only small symmetrical adjustments.\u003c\/p\u003e\u003cp\u003eFor vehicles with large aftermarket wheels, also check inner tyre clearance at steering lock and under compression before selecting the final height.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eCan the height be adjusted without removing the links?\u003c\/h3\u003e\u003cp\u003eYes. Opposing left-hand and right-hand threads allow the centre adjuster to be rotated while both sockets remain connected to the vehicle.\u003c\/p\u003e\u003ch3\u003eDoes the kit require coding?\u003c\/h3\u003e\u003cp\u003eNo. The ride-height change is created mechanically and does not require software coding or an electronic lowering module.\u003c\/p\u003e\u003ch3\u003eWill the original suspension modes remain available?\u003c\/h3\u003e\u003cp\u003eYes. The factory controls and selectable suspension modes remain available, although the vehicle operates around the newly selected static height.\u003c\/p\u003e\u003ch3\u003eShould the alignment be checked?\u003c\/h3\u003e\u003cp\u003eYes. A wheel-alignment check is recommended after the vehicle has settled, particularly with a larger drop or non-standard wheels.\u003c\/p\u003e\u003ch3\u003eCan the original height be restored?\u003c\/h3\u003e\u003cp\u003eYes. The links can be readjusted and the original factory links can also be reinstalled.\u003c\/p\u003e\n\u003ch2\u003eBAAN Lowering Links\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the CLS C257 kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007524966731,"sku":"BAAN-LL-SET-x-Mercedes-Benz-CLS-C257","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-air_57e958ce-ca45-497f-b92d-060fecf21e90.webp?v=1785554529","url":"https:\/\/baanvelgen.com\/products\/mercedes-benz-cls-c257-airmatic-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}