{"product_id":"mercedes-benz-s-class-cabriolet-a217-airmatic-lowering-links","title":"BAAN AIRMATIC Lowering Links for Mercedes-Benz S-Class Cabriolet A217","description":"\u003cp\u003e\u003cstrong\u003eBAAN AIRMATIC Lowering Links for Mercedes-Benz S-Class Cabriolet A217\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Mercedes-Benz S-Class Cabriolet A217 equipped with factory AIRMATIC air suspension.\u003c\/p\u003e\u003cp\u003eThe proportions of the Mercedes-Benz S-Class Cabriolet A217 leave considerable room for a more deliberate OEM+ setup. BAAN Lowering Links make it possible to give the open-top A217 a more finished side profile while keeping the original suspension controls available.\u003c\/p\u003e\n\u003ch2\u003eA lower stance for a four-seat luxury cabriolet\u003c\/h2\u003e\u003cp\u003eThe system gives the installer control over the final front-to-rear balance. That makes it possible to account for wheel diameter, tyre sidewall, vehicle load and the intended everyday ride height.\u003c\/p\u003e\n\u003ch2\u003ePrecision adjustment rather than a fixed drop\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable front range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable rear range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eA conservative OEM+ setting normally leaves more suspension travel and ground clearance than the maximum position. Always verify tyre, underbody and sensor-link clearance.\u003c\/p\u003e\n\u003ch2\u003eMechanical sensor geometry explained\u003c\/h2\u003e\u003cp\u003eAt each sensor location, the original fixed linkage is exchanged for an adjustable one. A carefully measured change in length produces a corresponding change in static body position. Reinstalling the factory links restores the original mechanical reference.\u003c\/p\u003e\n\u003ch2\u003eConstruction quality\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDeveloper\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBaanVelgen, Rotterdam, the Netherlands\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eManufacturing\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTaiwan, to BaanVelgen specifications\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eAdjuster material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePrecision-machined aluminium\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eConnection material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCorrosion-resistant stainless steel\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eThread arrangement\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLeft-hand and right-hand threads in one turnbuckle-style assembly\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eRetention method\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLock nuts plus dual metal safety clips\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eElectronic modification\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNone required\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003ch2\u003eKey functions\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eAdjustable mechanical ride-height control for the front and rear axles.\u003c\/li\u003e\n  \u003cli\u003eTurnbuckle-style centre sections that can be adjusted while the sockets remain connected.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel ball-joint sockets intended for exposed suspension locations.\u003c\/li\u003e\n  \u003cli\u003eMechanical locking on both sides of each centre adjuster.\u003c\/li\u003e\n  \u003cli\u003eRetention of the factory self-levelling interface and selectable suspension controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication details\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory AIRMATIC air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eS-Class Cabriolet A217\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003ePackage contents\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eFront axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003eRear axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003ePreassembled connection sockets and safety clips\u003c\/li\u003e\n  \u003cli\u003eAdjustment and installation information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eThe links are a direct sensor-link replacement and generally require around 60–90 minutes to install. Record the wheel-centre-to-arch measurements, begin from the supplied baseline and make only small symmetrical adjustments.\u003c\/p\u003e\u003cp\u003eThe final setup should be checked in the normal road mode and with normal tyre pressures. Reinspect the lock nuts and safety clips after the first period of use.\u003c\/p\u003e\n\u003ch2\u003eOwner questions\u003c\/h2\u003e\u003ch3\u003eHow much can the vehicle be lowered?\u003c\/h3\u003e\u003cp\u003eThe kit provides an adjustment range from close to the factory position to approximately 50 mm lower at the front and rear. The usable setting depends on clearance, calibration and road conditions.\u003c\/p\u003e\u003ch3\u003eAre the links suitable for winter use?\u003c\/h3\u003e\u003cp\u003eThe link ends and sockets are made from corrosion-resistant stainless steel. Periodic cleaning and inspection remain advisable after heavy salt exposure.\u003c\/p\u003e\u003ch3\u003eDo I need an electronic controller?\u003c\/h3\u003e\u003cp\u003eNo. The adjustable links change the sensor reference directly and do not add a controller to the suspension wiring.\u003c\/p\u003e\u003ch3\u003eIs the adjustment front and rear independent?\u003c\/h3\u003e\u003cp\u003eYes. Front and rear settings can be selected separately to achieve the required visual balance.\u003c\/p\u003e\u003ch3\u003eWhat should be checked after installation?\u003c\/h3\u003e\u003cp\u003eConfirm even ride height, sensor-link clearance, retaining-clip engagement, tyre clearance and wheel alignment.\u003c\/p\u003e\n\u003ch2\u003eDirect BAAN supply\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the S-Class Cabriolet A217 kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007523656011,"sku":"BAAN-LL-SET-x-Mercedes-Benz-S-Class-Cabriolet-A217","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-air_843dbd66-f6c5-48f6-9560-bc43cc0f7ab2.webp?v=1785554481","url":"https:\/\/baanvelgen.com\/products\/mercedes-benz-s-class-cabriolet-a217-airmatic-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}