{"product_id":"range-rover-sport-l494-air-suspension-lowering-links","title":"BAAN Air Suspension Lowering Links for Range Rover Sport L494","description":"\u003cp\u003e\u003cstrong\u003eBAAN Air Suspension Lowering Links for Range Rover Sport L494\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Range Rover Sport L494 equipped with factory electronic air suspension.\u003c\/p\u003e\u003cp\u003eWheel fitment on the Range Rover Sport L494 looks most coherent when the body sits at the correct visual height. This mechanical BAAN solution allows you to modernise the stance of the L494 by reducing arch gap while retaining the original selectable ride-height functions.\u003c\/p\u003e\u003cp\u003eBy keeping the modification at the sensor-link level, the BAAN kit remains straightforward to inspect, adjust and reverse. It also avoids the need to splice into the suspension electronics.\u003c\/p\u003e\n\u003ch2\u003eLowering without replacing the factory suspension\u003c\/h2\u003e\u003cp\u003eThe Range Rover Sport L494 measures suspension position through links between the axle or control arm and its height sensors. Changing the effective length of those links changes the mechanical reference supplied to the controller. The existing compressor, air springs, dampers and user controls remain in service.\u003c\/p\u003e\n\u003ch2\u003eAdjustment window\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFront adjustment\u003c\/th\u003e\n\u003ctd\u003eClose to factory height through approximately 50 mm lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRear adjustment\u003c\/th\u003e\n\u003ctd\u003eClose to factory height through approximately 50 mm lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eUse the stated range as an adjustment envelope rather than a guaranteed measured drop. The final result on the Range Rover Sport L494 depends on calibration, vehicle load, tyre pressure and wheel-and-tyre dimensions.\u003c\/p\u003e\n\u003ch2\u003eReasons to choose the BAAN set\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle-specific specification:\u003c\/strong\u003e supplied as a complete front-and-rear set for this application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn-car fine adjustment:\u003c\/strong\u003e the opposing thread directions allow the centre adjuster to be turned while installed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnderbody-ready materials:\u003c\/strong\u003e aluminium adjusters are paired with corrosion-resistant stainless-steel ends and sockets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure final setting:\u003c\/strong\u003e locking nuts and dual metal retaining clips provide positive mechanical retention.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo coding:\u003c\/strong\u003e no software changes or electronic suspension controller are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterials, threads and retention\u003c\/h2\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eRange Rover Sport L494\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuspension\u003c\/th\u003e\n\u003ctd\u003efactory electronic air suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCentre body\u003c\/th\u003e\n\u003ctd\u003ePrecision-machined aluminium with anti-slip knurling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEnds and sockets\u003c\/th\u003e\n\u003ctd\u003eCorrosion-resistant stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdjustment\u003c\/th\u003e\n\u003ctd\u003eOpposing left-hand and right-hand threads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eTwo mechanical lock nuts per link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSocket retention\u003c\/th\u003e\n\u003ctd\u003eDual metal safety-retaining clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInspection\u003c\/th\u003e\n\u003ctd\u003eCritical dimensions checked with 0.001 mm-resolution measuring equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eDeveloped in Rotterdam; manufactured in Taiwan to BaanVelgen specifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSuitable vehicles\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory electronic air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRange Rover Sport L494\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003eSet composition\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eComplete BAAN lowering-link set for the front and rear axles\u003c\/li\u003e\n  \u003cli\u003eAluminium threaded centre adjusters\u003c\/li\u003e\n  \u003cli\u003eStainless-steel ends and ball-joint sockets\u003c\/li\u003e\n  \u003cli\u003eLock nuts and dual safety-retaining clips\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific baseline and installation guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMeasurement and installation notes\u003c\/h2\u003e\u003cp\u003eThe links are a direct sensor-link replacement and generally require around 60–90 minutes to install. Record the wheel-centre-to-arch measurements, begin from the supplied baseline and make only small symmetrical adjustments.\u003c\/p\u003e\u003cp\u003eOnce the vehicle has completed a settling drive, recheck all four measurements and arrange a professional alignment. A significant ride-height change can alter toe, camber, tyre clearance and available suspension travel.\u003c\/p\u003e\n\u003ch2\u003eAnswers for Range Rover Sport L494 owners\u003c\/h2\u003e\u003ch3\u003eCan the height be adjusted without removing the links?\u003c\/h3\u003e\u003cp\u003eYes. Opposing left-hand and right-hand threads allow the centre adjuster to be rotated while both sockets remain connected to the vehicle.\u003c\/p\u003e\u003ch3\u003eDoes the kit require coding?\u003c\/h3\u003e\u003cp\u003eNo. The ride-height change is created mechanically and does not require software coding or an electronic lowering module.\u003c\/p\u003e\u003ch3\u003eWill the original suspension modes remain available?\u003c\/h3\u003e\u003cp\u003eYes. The factory controls and selectable suspension modes remain available, although the vehicle operates around the newly selected static height.\u003c\/p\u003e\u003ch3\u003eShould the alignment be checked?\u003c\/h3\u003e\u003cp\u003eYes. A wheel-alignment check is recommended after the vehicle has settled, particularly with a larger drop or non-standard wheels.\u003c\/p\u003e\u003ch3\u003eCan the original height be restored?\u003c\/h3\u003e\u003cp\u003eYes. The links can be readjusted and the original factory links can also be reinstalled.\u003c\/p\u003e\n\u003ch2\u003ePurchase from BaanVelgen\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the Range Rover Sport L494 kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007496327499,"sku":"BAAN-LL-SET-x-Range-Rover-Sport-L494","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-air_b7c163a0-27d0-4fca-8420-870da95bb678.webp?v=1785554387","url":"https:\/\/baanvelgen.com\/products\/range-rover-sport-l494-air-suspension-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}