{"product_id":"range-rover-velar-air-suspension-lowering-links","title":"BAAN Air Suspension Lowering Links for Range Rover Velar","description":"\u003cp\u003e\u003cstrong\u003eBAAN Air Suspension Lowering Links for Range Rover Velar\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Range Rover Velar equipped with factory electronic air suspension.\u003c\/p\u003e\u003cp\u003eThe proportions of the Range Rover Velar leave considerable room for a more deliberate OEM+ setup. BAAN Lowering Links make it possible to emphasise the Velar’s clean body surfacing with a lower position that keeps the factory suspension architecture.\u003c\/p\u003e\n\u003ch2\u003eDeveloped around the Range Rover Velar platform\u003c\/h2\u003e\u003cp\u003eThe vehicle-specific starting dimensions are intended to simplify installation. Final measurements should still be taken at all four wheel arches because production tolerances and vehicle equipment can influence the measured result.\u003c\/p\u003e\n\u003ch2\u003eVehicle-specific benefits\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete lowering-link kit\u003c\/strong\u003e matched to the vehicle’s factory sensor layout.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLeft-hand\/right-hand thread design\u003c\/strong\u003e for adjustment without repeatedly releasing the factory sensor arms.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMachined aluminium centre bodies\u003c\/strong\u003e with stainless-steel connection components.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual safety clips\u003c\/strong\u003e and separate lock nuts at both ends of the adjuster.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReversible installation\u003c\/strong\u003e with the original vehicle electronics left untouched.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow the lowering reference is created\u003c\/h2\u003e\u003cp\u003eBAAN Lowering Links do not directly compress the air springs. They alter the geometry seen by the factory ride-height sensors. The control system responds by maintaining the vehicle around the new reference position, with no added electronics in the signal path.\u003c\/p\u003e\n\u003ch2\u003eFront-to-rear height selection\u003c\/h2\u003e\u003cp\u003eThe BAAN set allows the Range Rover Velar to be set from a near-standard position to roughly 50 mm lower at each axle. Front and rear can be tuned separately where required.\u003c\/p\u003e\n\u003cp\u003eMeasure from the wheel centre to the arch before and after every adjustment. Counting turns alone is not sufficient because the relationship between link length and body height differs by suspension geometry.\u003c\/p\u003e\n\u003ch2\u003eComponent specification\u003c\/h2\u003e\u003cp\u003eThe centre adjusters are machined from aluminium and use opposing thread directions. Stainless-steel link ends and ball-joint sockets provide corrosion resistance in the exposed suspension environment. Once the correct length is set, separate locking nuts secure both sides of the adjuster.\u003c\/p\u003e\n\u003cp\u003eEach socket is retained by metal safety clips. Critical dimensions are inspected using measuring equipment capable of 0.001 mm resolution. The product is developed by BaanVelgen in Rotterdam and manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e\n\u003ch2\u003eCompatibility check\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory electronic air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRange Rover Velar\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003eSupplied components\u003c\/h2\u003e\u003cp\u003eThe package contains the vehicle-specific adjustable links, all fitted stainless-steel socket ends, lock nuts, retaining clips and the relevant starting guidance. The listed price is for the complete vehicle set, not a single link.\u003c\/p\u003e\n\u003ch2\u003eFitting the links\u003c\/h2\u003e\u003cp\u003eAllow approximately 60–90 minutes for installation and initial setup. After the first road test, remeasure the vehicle on a flat surface and confirm that the selected height is even from left to right.\u003c\/p\u003e\u003cp\u003eDo not use the sensor arms as levers when releasing the original sockets. After fitting, confirm that the links move freely through the normal suspension range and do not touch adjacent components.\u003c\/p\u003e\n\u003ch2\u003eTechnical FAQ\u003c\/h2\u003e\u003ch3\u003eHow much can the vehicle be lowered?\u003c\/h3\u003e\u003cp\u003eThe kit provides an adjustment range from close to the factory position to approximately 50 mm lower at the front and rear. The usable setting depends on clearance, calibration and road conditions.\u003c\/p\u003e\u003ch3\u003eAre the links suitable for winter use?\u003c\/h3\u003e\u003cp\u003eThe link ends and sockets are made from corrosion-resistant stainless steel. Periodic cleaning and inspection remain advisable after heavy salt exposure.\u003c\/p\u003e\u003ch3\u003eDo I need an electronic controller?\u003c\/h3\u003e\u003cp\u003eNo. The adjustable links change the sensor reference directly and do not add a controller to the suspension wiring.\u003c\/p\u003e\u003ch3\u003eIs the adjustment front and rear independent?\u003c\/h3\u003e\u003cp\u003eYes. Front and rear settings can be selected separately to achieve the required visual balance.\u003c\/p\u003e\u003ch3\u003eWhat should be checked after installation?\u003c\/h3\u003e\u003cp\u003eConfirm even ride height, sensor-link clearance, retaining-clip engagement, tyre clearance and wheel alignment.\u003c\/p\u003e\n\u003ch2\u003eAvailability and support\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the Range Rover Velar kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007503667531,"sku":"BAAN-LL-SET-x-Range-Rover-Velar","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-air_1041dfd5-a4dd-45e8-9963-9a09624b4c15.webp?v=1785554396","url":"https:\/\/baanvelgen.com\/products\/range-rover-velar-air-suspension-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}