{"product_id":"rolls-royce-ghost-series-ii-air-suspension-lowering-links","title":"BAAN Air Suspension Lowering Links for Rolls-Royce Ghost Series II","description":"\u003cp\u003e\u003cstrong\u003eBAAN Air Suspension Lowering Links for Rolls-Royce Ghost Series II\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Rolls-Royce Ghost Series II equipped with factory air suspension.\u003c\/p\u003e\u003cp\u003eWheel fitment on the Rolls-Royce Ghost Series II looks most coherent when the body sits at the correct visual height. This mechanical BAAN solution allows you to give the Ghost a more bespoke wheel-led stance while preserving its factory self-levelling system.\u003c\/p\u003e\n\u003ch2\u003eA lower stance for a contemporary luxury saloon\u003c\/h2\u003e\u003cp\u003eThe links are not a fixed-height component. Small changes to the central adjusters allow the stance to be refined after the vehicle has settled, rather than accepting a single predetermined drop.\u003c\/p\u003e\n\u003ch2\u003ePrecision adjustment rather than a fixed drop\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable front range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable rear range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eA conservative OEM+ setting normally leaves more suspension travel and ground clearance than the maximum position. Always verify tyre, underbody and sensor-link clearance.\u003c\/p\u003e\n\u003ch2\u003eMechanical sensor geometry explained\u003c\/h2\u003e\u003cp\u003eAt each sensor location, the original fixed linkage is exchanged for an adjustable one. A carefully measured change in length produces a corresponding change in static body position. Reinstalling the factory links restores the original mechanical reference.\u003c\/p\u003e\n\u003ch2\u003eConstruction quality\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDeveloper\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBaanVelgen, Rotterdam, the Netherlands\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eManufacturing\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTaiwan, to BaanVelgen specifications\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eAdjuster material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePrecision-machined aluminium\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eConnection material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCorrosion-resistant stainless steel\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eThread arrangement\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLeft-hand and right-hand threads in one turnbuckle-style assembly\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eRetention method\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLock nuts plus dual metal safety clips\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eElectronic modification\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNone required\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003ch2\u003eKey functions\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eAdjustable mechanical ride-height control for the front and rear axles.\u003c\/li\u003e\n  \u003cli\u003eTurnbuckle-style centre sections that can be adjusted while the sockets remain connected.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel ball-joint sockets intended for exposed suspension locations.\u003c\/li\u003e\n  \u003cli\u003eMechanical locking on both sides of each centre adjuster.\u003c\/li\u003e\n  \u003cli\u003eRetention of the factory self-levelling interface and selectable suspension controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication details\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGhost Series II\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003ePackage contents\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eFront axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003eRear axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003ePreassembled connection sockets and safety clips\u003c\/li\u003e\n  \u003cli\u003eAdjustment and installation information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eInstallation normally takes approximately 60–90 minutes for an experienced technician. Measure the original ride height before starting, adjust both sides in equal increments and secure every locking nut and retaining clip before the vehicle is lowered from the lift.\u003c\/p\u003e\u003cp\u003eThe final setup should be checked in the normal road mode and with normal tyre pressures. Reinspect the lock nuts and safety clips after the first period of use.\u003c\/p\u003e\n\u003ch2\u003eOwner questions\u003c\/h2\u003e\u003ch3\u003eCan the height be adjusted without removing the links?\u003c\/h3\u003e\u003cp\u003eYes. Opposing left-hand and right-hand threads allow the centre adjuster to be rotated while both sockets remain connected to the vehicle.\u003c\/p\u003e\u003ch3\u003eDoes the kit require coding?\u003c\/h3\u003e\u003cp\u003eNo. The ride-height change is created mechanically and does not require software coding or an electronic lowering module.\u003c\/p\u003e\u003ch3\u003eWill the original suspension modes remain available?\u003c\/h3\u003e\u003cp\u003eYes. The factory controls and selectable suspension modes remain available, although the vehicle operates around the newly selected static height.\u003c\/p\u003e\u003ch3\u003eShould the alignment be checked?\u003c\/h3\u003e\u003cp\u003eYes. A wheel-alignment check is recommended after the vehicle has settled, particularly with a larger drop or non-standard wheels.\u003c\/p\u003e\u003ch3\u003eCan the original height be restored?\u003c\/h3\u003e\u003cp\u003eYes. The links can be readjusted and the original factory links can also be reinstalled.\u003c\/p\u003e\n\u003ch2\u003eDirect BAAN supply\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the Ghost Series II kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007525228875,"sku":"BAAN-LL-SET-x-Rolls-Royce-Ghost-Series-II","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-links_b918b164-138b-4617-918c-bd5f37bb6c70.webp?v=1785554558","url":"https:\/\/baanvelgen.com\/products\/rolls-royce-ghost-series-ii-air-suspension-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}