{"product_id":"tesla-model-x-palladium-air-suspension-lowering-links","title":"BAAN Air Suspension Lowering Links for Tesla Model X Palladium","description":"\u003cp\u003e\u003cstrong\u003eBAAN Air Suspension Lowering Links for Tesla Model X Palladium\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Tesla Model X Palladium equipped with factory adaptive air suspension.\u003c\/p\u003e\u003cp\u003eFor a wheel-focused build, the standard ride height of the Tesla Model X Palladium can be the final detail preventing the setup from looking complete. This kit is created to reduce the tall body-to-wheel gap for a more composed road presence while retaining the original adaptive system.\u003c\/p\u003e\n\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel-specific starting dimensions\u003c\/strong\u003e rather than a universal one-size-fits-all link.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndependent axle setup\u003c\/strong\u003e for a balanced front-to-rear stance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision-machined construction\u003c\/strong\u003e with critical dimensions checked using 0.001 mm-resolution measuring equipment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect sensor-ball fitment\u003c\/strong\u003e with stainless-steel sockets and safety-retaining clips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMechanical, reversible operation\u003c\/strong\u003e without adding a signal-interception module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe system gives the installer control over the final front-to-rear balance. That makes it possible to account for wheel diameter, tyre sidewall, vehicle load and the intended everyday ride height.\u003c\/p\u003e\n\u003ch2\u003eTechnical data for the Model X Palladium\u003c\/h2\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBAAN part category\u003c\/th\u003e\n\u003ctd\u003eAdjustable ride-height sensor links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVehicle platform\u003c\/th\u003e\n\u003ctd\u003eTesla Model X Palladium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCentral adjuster\u003c\/th\u003e\n\u003ctd\u003eKnurled machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBall-joint connection\u003c\/th\u003e\n\u003ctd\u003eStainless-steel sockets for the factory sensor balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdjustment method\u003c\/th\u003e\n\u003ctd\u003eRotate the centre section while installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecuring method\u003c\/th\u003e\n\u003ctd\u003eLock nuts and two safety-retaining clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoding\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReversibility\u003c\/th\u003e\n\u003ctd\u003eOriginal links can be refitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eProduction dimensions are checked with precision equipment with a display resolution of 0.001 mm.\u003c\/p\u003e\n\u003ch2\u003eAdjusting front and rear ride height\u003c\/h2\u003e\u003cp\u003eRide height is continuously adjustable rather than limited to a fixed drop. The normal working range is from close to the original setting to approximately 50 mm lower on the front and rear axles.\u003c\/p\u003e\n\u003cp\u003eThe selected stance should be based on real measurements after the air suspension has settled in its normal road mode.\u003c\/p\u003e\n\u003ch2\u003eOperating principle\u003c\/h2\u003e\u003cp\u003eThe product works at the point where suspension movement is translated into sensor movement. By recalibrating that relationship mechanically, the Model X Palladium can sit lower while continuing to use its standard suspension interface and self-levelling logic.\u003c\/p\u003e\n\u003ch2\u003eWhat arrives in the box?\u003c\/h2\u003e\u003cp\u003eYou receive a complete model-specific kit for both axles. No separate electronic controller is needed. Reuse of the original sensor balls is part of the direct-fit installation.\u003c\/p\u003e\n\u003ch2\u003eFitment requirements\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory adaptive air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eModel X Palladium\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003eCorrect installation procedure\u003c\/h2\u003e\u003cp\u003eAllow approximately 60–90 minutes for installation and initial setup. After the first road test, remeasure the vehicle on a flat surface and confirm that the selected height is even from left to right.\u003c\/p\u003e\u003cp\u003eFor vehicles with large aftermarket wheels, also check inner tyre clearance at steering lock and under compression before selecting the final height.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eHow much can the vehicle be lowered?\u003c\/h3\u003e\u003cp\u003eThe kit provides an adjustment range from close to the factory position to approximately 50 mm lower at the front and rear. The usable setting depends on clearance, calibration and road conditions.\u003c\/p\u003e\u003ch3\u003eAre the links suitable for winter use?\u003c\/h3\u003e\u003cp\u003eThe link ends and sockets are made from corrosion-resistant stainless steel. Periodic cleaning and inspection remain advisable after heavy salt exposure.\u003c\/p\u003e\u003ch3\u003eDo I need an electronic controller?\u003c\/h3\u003e\u003cp\u003eNo. The adjustable links change the sensor reference directly and do not add a controller to the suspension wiring.\u003c\/p\u003e\u003ch3\u003eIs the adjustment front and rear independent?\u003c\/h3\u003e\u003cp\u003eYes. Front and rear settings can be selected separately to achieve the required visual balance.\u003c\/p\u003e\u003ch3\u003eWhat should be checked after installation?\u003c\/h3\u003e\u003cp\u003eConfirm even ride height, sensor-link clearance, retaining-clip engagement, tyre clearance and wheel alignment.\u003c\/p\u003e\n\u003ch2\u003eBAAN Lowering Links\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the Model X Palladium kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007528472907,"sku":"BAAN-LL-SET-x-Tesla-Model-X-Palladium","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-air_cb262d24-41e7-41b6-8440-2705b4041048.webp?v=1785554682","url":"https:\/\/baanvelgen.com\/products\/tesla-model-x-palladium-air-suspension-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}