{"product_id":"volvo-ex90-v536-air-suspension-lowering-links","title":"BAAN Air Suspension Lowering Links for Volvo EX90 V536","description":"\u003cp\u003e\u003cstrong\u003eBAAN Air Suspension Lowering Links for Volvo EX90 V536\u003c\/strong\u003e are a model-specific mechanical lowering solution for the Volvo EX90 V536 equipped with factory air suspension.\u003c\/p\u003e\u003cp\u003eA carefully chosen ride height can change the entire side profile of the Volvo EX90 V536. These adjustable BAAN links are designed to visually lower the tall electric platform and create a more integrated stance around the large wheel openings.\u003c\/p\u003e\n\u003ch2\u003eA lower stance for a electric flagship SUV\u003c\/h2\u003e\u003cp\u003eFor the Volvo EX90 V536, the most convincing result is usually not the lowest possible setting but a measured position that preserves clearance and suspension travel. The adjustable construction supports that approach.\u003c\/p\u003e\n\u003ch2\u003ePrecision adjustment rather than a fixed drop\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable front range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsable rear range\u003c\/th\u003e\n\u003ctd\u003e0–50 mm lower, approximately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eA conservative OEM+ setting normally leaves more suspension travel and ground clearance than the maximum position. Always verify tyre, underbody and sensor-link clearance.\u003c\/p\u003e\n\u003ch2\u003eMechanical sensor geometry explained\u003c\/h2\u003e\u003cp\u003eAt each sensor location, the original fixed linkage is exchanged for an adjustable one. A carefully measured change in length produces a corresponding change in static body position. Reinstalling the factory links restores the original mechanical reference.\u003c\/p\u003e\n\u003ch2\u003eConstruction quality\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDeveloper\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBaanVelgen, Rotterdam, the Netherlands\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eManufacturing\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTaiwan, to BaanVelgen specifications\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eAdjuster material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePrecision-machined aluminium\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eConnection material\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCorrosion-resistant stainless steel\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eThread arrangement\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLeft-hand and right-hand threads in one turnbuckle-style assembly\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eRetention method\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLock nuts plus dual metal safety clips\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eElectronic modification\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNone required\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003ch2\u003eKey functions\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eAdjustable mechanical ride-height control for the front and rear axles.\u003c\/li\u003e\n  \u003cli\u003eTurnbuckle-style centre sections that can be adjusted while the sockets remain connected.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel ball-joint sockets intended for exposed suspension locations.\u003c\/li\u003e\n  \u003cli\u003eMechanical locking on both sides of each centre adjuster.\u003c\/li\u003e\n  \u003cli\u003eRetention of the factory self-levelling interface and selectable suspension controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication details\u003c\/h2\u003e\u003cp\u003eThis product is intended for the following application when equipped with factory air suspension:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eEX90 V536\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSuspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.\u003c\/p\u003e\n\u003ch2\u003ePackage contents\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eFront axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003eRear axle adjustable sensor links\u003c\/li\u003e\n  \u003cli\u003ePreassembled connection sockets and safety clips\u003c\/li\u003e\n  \u003cli\u003eAdjustment and installation information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAfter installation\u003c\/h2\u003e\u003cp\u003eAllow approximately 60–90 minutes for installation and initial setup. After the first road test, remeasure the vehicle on a flat surface and confirm that the selected height is even from left to right.\u003c\/p\u003e\u003cp\u003eThe final setup should be checked in the normal road mode and with normal tyre pressures. Reinspect the lock nuts and safety clips after the first period of use.\u003c\/p\u003e\n\u003ch2\u003eOwner questions\u003c\/h2\u003e\u003ch3\u003eIs this a fixed lowering kit?\u003c\/h3\u003e\u003cp\u003eNo. The final height can be fine-tuned through the threaded centre adjusters.\u003c\/p\u003e\u003ch3\u003eCan the car still self-level?\u003c\/h3\u003e\u003cp\u003eThe factory self-levelling system remains in use. The links simply establish a lower mechanical reference position.\u003c\/p\u003e\u003ch3\u003eWill lowering change the ride?\u003c\/h3\u003e\u003cp\u003eA modest change generally retains the character of the factory system, but a larger drop reduces available suspension travel and may make the vehicle feel firmer.\u003c\/p\u003e\u003ch3\u003eCan a workshop install the kit?\u003c\/h3\u003e\u003cp\u003eYes. The kit can be installed by a qualified workshop using normal hand tools and the supplied baseline guidance.\u003c\/p\u003e\u003ch3\u003eIs fitment reversible?\u003c\/h3\u003e\u003cp\u003eYes. No permanent change to the suspension electronics is required, and the original links can be refitted.\u003c\/p\u003e\n\u003ch2\u003eDirect BAAN supply\u003c\/h2\u003e\u003cp\u003eBaanVelgen supplies the EX90 V536 kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.\u003c\/p\u003e","brand":"Baan","offers":[{"title":"Default Title","offer_id":58007526801739,"sku":"BAAN-LL-SET-x-Volvo-EX90-V536","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/9590\/7277\/files\/lowering-air_0412d83a-083c-40b6-83cd-bb7bfa34f65e.webp?v=1785554634","url":"https:\/\/baanvelgen.com\/products\/volvo-ex90-v536-air-suspension-lowering-links","provider":"Baan Velgen B.V.","version":"1.0","type":"link"}