BBS FI-R EVO Application Guide: Sizes, Fitments and Finishes

The BBS FI-R EVO is one of the most technically advanced forged monoblock wheels in the BBS Motorsport range. This application guide brings together the official vehicle fitments, front and rear wheel dimensions, offsets, BBS references, item numbers, mounting systems and available finishes in one place.

Use the guide to identify the correct starting point for your vehicle, then contact BaanVelgen to verify the exact model version, brake package, tyre specification and intended use before ordering.

What is the BBS FI-R EVO?

The FI-R EVO is a forged high-performance wheel developed by BBS Motorsport around the principles of low rotating mass, structural rigidity and precise vehicle response. Its recognisable spoke design uses extensive weight-relief milling, with material removed only where it is not required for the wheel's structural performance.

BBS Motorsport states that the FI-R EVO draws on engineering experience from more than 6,000 race victories and decades of international motorsport involvement. The wheel is validated through durability testing exceeding two million load cycles and receives a three-layer paint system produced to automotive-industry quality standards.

• Forged monoblock construction for high strength with reduced mass
• Patented weight-relief milling within the spoke design
• Vehicle-specific dimensions and offsets listed by BBS Motorsport
• 19-, 20- and 21-inch applications depending on the vehicle
• Bolt-on and centerlock configurations within the official range
• Three-layer paint technology developed for appearance and durability

What is the difference between BBS FI-R and FI-R EVO?

The standard FI-R already uses radical spoke milling to remove unnecessary material. The FI-R EVO adds an additional precision-machined breakthrough within each spoke. This further optimises material distribution and reduces rotating mass while retaining the rigidity and strength required for demanding road and track use.

For buyers comparing both designs, the most visible distinction is the additional opening in the FI-R EVO spoke. The practical objective is not styling alone: it is a further reduction in rotating mass and a more efficient forged structure.

BBS FI-R EVO finishes available from BaanVelgen

The current BaanVelgen FI-R EVO selection is available in six finishes:

• Motorsport Gold
• White Gold
• Indigo Blue
• Silver
• Dark Grey
• Satin Black

Finish appearance can vary slightly according to studio lighting, daylight and screen settings. Contact BaanVelgen when matching a wheel finish to a specific exterior colour, trim package or existing vehicle detail.

Complete BBS FI-R EVO application overview

The table below summarises the vehicle-specific applications in the official BBS Motorsport list. CL means centerlock. Wheel dimensions are shown as width × diameter, followed by the offset.

*The 5 × 112 connection for FI-R EVO 210 is reproduced exactly as stated in the official BBS Motorsport application list. BaanVelgen will verify the exact vehicle specification before accepting an order.

Alternative BMW G80/G82 front wheel: BBS also lists FI-R EVO 213, item number 1618294, in 9.5 × 20 ET10 for the front axle. This provides an alternative starting point for a 20-inch front configuration and must be matched to the complete setup before ordering.

Vehicle-specific BBS FI-R EVO applications

BMW 5 Series G30 and G31

The G30 saloon and G31 Touring use a staggered 20-inch setup. FI-R EVO 200 is specified for the front axle and FI-R EVO 201 for the rear, both with a 5 × 112 connection.

• Front: item 1618262, FI-R EVO 200, 9.0 × 20 ET25
• Rear: item 1618263, FI-R EVO 201, 10.5 × 20 ET34

View BBS FI-R EVO wheels for BMW G30 / G31

McLaren 720S

The McLaren 720S application combines a 19-inch front wheel with a 20-inch rear. This preserves the staggered diameter and width relationship used for the vehicle-specific BBS setup.

• Front: item 1617194, FI-R EVO 202, 9.0 × 19 ET35
• Rear: item 1618270, FI-R EVO 203, 11.5 × 20 ET25

View BBS FI-R EVO wheels for McLaren 720S

BMW G80 M3 and G82 M4

The standard listed configuration uses a 19-inch front and 20-inch rear wheel. BBS also lists a separate 20-inch front application, FI-R EVO 213, for a configuration that requires a 20-inch front wheel.

• Standard front: item 1617195, FI-R EVO 206, 9.5 × 19 ET15
• Rear: item 1618274, FI-R EVO 207, 10.5 × 20 ET15
• Alternative front: item 1618294, FI-R EVO 213, 9.5 × 20 ET10

View BBS FI-R EVO wheels for BMW G80 M3 / G82 M4

Tesla Model S Type 002

BBS lists FI-R EVO 208 as a square 21-inch application, using the same wheel dimension and offset on the front and rear axles.

• Front and rear: item 1619139, FI-R EVO 208, 9.0 × 21 ET33
• Connection: 5 × 120

View BBS FI-R EVO wheels for Tesla Model S

BMW F20/F21 1 Series and F22/F23 2 Series

The official list specifies a square 19-inch FI-R EVO 210 application for these compact BMW platforms. Final chassis and hub compatibility must be verified before ordering.

• Front and rear: item 1617197, FI-R EVO 210, 8.0 × 19 ET45
• Connection stated by BBS: 5 × 112

View BBS FI-R EVO wheels for BMW F20/F21 and F22/F23

BMW G60/G61 5 Series and i5 M60

The current-generation 5 Series and i5 M60 use a staggered 21-inch package in the official application list, with dedicated front and rear widths and offsets.

• Front: item 1619152, FI-R EVO 214, 9.0 × 21 ET32
• Rear: item 1619153, FI-R EVO 215, 10.5 × 21 ET42

View BBS FI-R EVO wheels for BMW G60, G61 and i5 M60

Chevrolet Corvette C8 Z06

The C8 Z06 application is one of the widest bolt-on configurations in the FI-R EVO list. It combines a 10-inch front wheel with a 13-inch rear and uses a 20/21-inch staggered diameter.

• Front: item 1618311, FI-R EVO 219, 10.0 × 20 ET30
• Rear: item 1619170, FI-R EVO 220, 13.0 × 21 ET35
• Connection: 5 × 120

View BBS FI-R EVO wheels for Corvette C8 Z06

BBS FI-R EVO centerlock applications

BBS uses the abbreviation CL for centerlock. The FI-R EVO centerlock range covers multiple Porsche GT and Turbo applications, with a vehicle-specific rear wheel paired to the appropriate front specification.

Porsche 992 Turbo and Turbo S

• Front: item 1618272, FI-R EVO 204, 9.5 × 20 ET44, centerlock
• Rear: item 1619137, FI-R EVO 205, 12.0 × 21 ET70, centerlock

View BBS FI-R EVO centerlock wheels for Porsche 992 Turbo / Turbo S

Porsche 992.1 GT3

• Front: item 1618272, FI-R EVO 204, 9.5 × 20 ET44, centerlock
• Rear: item 1619140, FI-R EVO 209, 12.0 × 21 ET45, centerlock

View BBS FI-R EVO centerlock wheels for Porsche 992.1 GT3

Porsche 718 Cayman GT4 RS

• Front: item 1618290, FI-R EVO 211, 8.5 × 20 ET61, centerlock
• Rear: item 1618291, FI-R EVO 212, 11.0 × 20 ET50, centerlock

View BBS FI-R EVO centerlock wheels for Porsche 718 Cayman GT4 RS

Porsche 992.2 GT3

• Front: item 1618272, FI-R EVO 204, 9.5 × 20 ET44, centerlock
• Rear: item 1619160, FI-R EVO 216, 12.0 × 21 ET45, centerlock

View BBS FI-R EVO centerlock wheels for Porsche 992.2 GT3

Porsche 992 GT3 RS

The 992 GT3 RS uses the widest rear wheel in the listed FI-R EVO range: a 13.0 × 21 rear paired with a 10.0 × 20 front.

• Front: item 1618304, FI-R EVO 217, 10.0 × 20 ET45, centerlock
• Rear: item 1619164, FI-R EVO 218, 13.0 × 21 ET31, centerlock

View BBS FI-R EVO centerlock wheels for Porsche 992 GT3 RS

Porsche 992.2 Turbo S

• Front: item 1618272, FI-R EVO 204, 9.5 × 20 ET44, centerlock
• Rear: item 1619171, FI-R EVO 221, 12.0 × 21 ET60, centerlock

View BBS FI-R EVO centerlock wheels for Porsche 992.2 Turbo S

How to choose the correct BBS FI-R EVO fitment

An application list is the starting point, not a substitute for a final fitment check. Two cars with a similar model name can use different brakes, hubs, suspension settings or tyre combinations.

Before ordering, BaanVelgen checks:

• the exact vehicle model and generation;
• model year and market specification;
• standard or optional brake system;
• bolt-on or centerlock mounting;
• front and rear tyre sizes;
• TPMS requirements;
• suspension height and alignment settings;
• road, fast-road or track use;
• the selected finish and current factory availability.

Why order BBS FI-R EVO wheels from BaanVelgen?

✔ Genuine BBS Motorsport FI-R EVO wheel sets
✔ Official vehicle-specific front and rear applications
✔ Expert brake-clearance, tyre and TPMS verification
✔ Bolt-on and Porsche centerlock fitment support
✔ Complete wheel and tyre packages available
✔ Secure worldwide shipping
✔ Personal advice before ordering

Availability and lead time depend on the application and finish. Contact BaanVelgen for the current price, production status and expected delivery time for your vehicle.

Frequently asked questions

Are BBS FI-R EVO wheels forged?

Yes. The FI-R EVO is a forged monoblock wheel developed by BBS Motorsport for high-performance road and track applications.

What is the difference between the BBS FI-R and FI-R EVO?

The FI-R EVO adds an additional precision-machined opening within each spoke. This further reduces rotating mass and optimises material distribution compared with the standard FI-R design.

Which sizes are available for the BBS FI-R EVO?

The official vehicle applications in this guide use 19-, 20- and 21-inch wheels. The available combination depends on the specific vehicle.

Which BBS FI-R EVO colours are available from BaanVelgen?

The current selection consists of Motorsport Gold, White Gold, Indigo Blue, Silver, Dark Grey and Satin Black.

Are BBS FI-R EVO wheels available for centerlock cars?

Yes. The official application list contains centerlock fitments for the Porsche 992 Turbo and Turbo S, 992.1 GT3, 992.2 GT3, 992 GT3 RS, 718 Cayman GT4 RS and 992.2 Turbo S.

Is the product price for one wheel or a complete set?

The vehicle-specific BaanVelgen product pages are configured as complete sets of four wheels using the appropriate front and rear specifications.

Can BaanVelgen supply tyres and TPMS?

Yes. BaanVelgen can prepare a complete wheel and tyre package after confirming the tyre sizes, TPMS requirements and intended vehicle use.

Will BBS FI-R EVO wheels fit over carbon-ceramic brakes?

Brake clearance depends on the exact vehicle and brake specification. BaanVelgen verifies the application and brake package before confirming the order.

How long does delivery take?

Lead time varies by wheel application, finish and factory availability. Contact BaanVelgen for the current production and delivery estimate.

Can the finish look different in person?

Yes. Metallic finishes react to lighting and can appear different under studio light, daylight and artificial light. Screen calibration can also affect colour reproduction.

Contact BaanVelgen to confirm the correct BBS FI-R EVO application for your vehicle.