Baan
BAAN Air Suspension Lowering Links for Land Rover Discovery 5
✔ Complete vehicle-specific set
✔ Adjustable on the car using left- and right-hand threads
✔ Precision-machined aluminium adjusters with stainless-steel ends
✔ No software coding or electronic lowering module required
✔ Keeps the factory air-suspension controls fully operational
Worldwide shipping, calculated automatically at checkout
5-year Baan product warranty
Request Special Price
Choose options
✔ Complete vehicle-specific set
✔ Adjustable on the car using left- and right-hand threads
✔ Precision-machined aluminium adjusters with stainless-steel ends
✔ No software coding or electronic lowering module required
✔ Keeps the factory air-suspension controls fully operational
Worldwide shipping, calculated automatically at checkout
5-year Baan product warranty
✔ Complete vehicle-specific set
✔ Adjustable on the car using left- and right-hand threads
✔ Precision-machined aluminium adjusters with stainless-steel ends
✔ No software coding or electronic lowering module required
✔ Keeps the factory air-suspension controls fully operational
Worldwide shipping, calculated automatically at checkout
5-year Baan product warranty
BAAN Air Suspension Lowering Links for Land Rover Discovery 5 are a model-specific mechanical lowering solution for the Land Rover Discovery 5 equipped with factory electronic air suspension.
The Land Rover Discovery 5 combines a large premium SUV body with an adjustable factory suspension system. BAAN Lowering Links let the owner reduce the standard wheel gap for a cleaner everyday road stance without removing the versatility of the factory system.
The system gives the installer control over the final front-to-rear balance. That makes it possible to account for wheel diameter, tyre sidewall, vehicle load and the intended everyday ride height.
Five core features
- Model-specific starting dimensions rather than a universal one-size-fits-all link.
- Independent axle setup for a balanced front-to-rear stance.
- Precision-machined construction with critical dimensions checked using 0.001 mm-resolution measuring equipment.
- Direct sensor-ball fitment with stainless-steel sockets and safety-retaining clips.
- Mechanical, reversible operation without adding a signal-interception module.
How much adjustment is available?
Ride height is continuously adjustable rather than limited to a fixed drop. The normal working range is from close to the original setting to approximately 50 mm lower on the front and rear axles.
The selected stance should be based on real measurements after the air suspension has settled in its normal road mode.
Direct interaction with the factory height sensors
The product works at the point where suspension movement is translated into sensor movement. By recalibrating that relationship mechanically, the Discovery 5 can sit lower while continuing to use its standard suspension interface and self-levelling logic.
Detailed product specification
| BAAN part category | Adjustable ride-height sensor links |
|---|---|
| Vehicle platform | Land Rover Discovery 5 |
| Central adjuster | Knurled machined aluminium |
| Ball-joint connection | Stainless-steel sockets for the factory sensor balls |
| Adjustment method | Rotate the centre section while installed |
| Securing method | Lock nuts and two safety-retaining clips |
| Coding | Not required |
| Reversibility | Original links can be refitted |
Production dimensions are checked with precision equipment with a display resolution of 0.001 mm.
Before placing an order
This product is intended for the following application when equipped with factory electronic air suspension:
- Discovery 5
Suspension specifications can vary by market, model year and optional equipment. Send BaanVelgen the VIN when confirmation is required before ordering.
Complete set information
You receive a complete model-specific kit for both axles. No separate electronic controller is needed. Reuse of the original sensor balls is part of the direct-fit installation.
Installation and inspection
Installation normally takes approximately 60–90 minutes for an experienced technician. Measure the original ride height before starting, adjust both sides in equal increments and secure every locking nut and retaining clip before the vehicle is lowered from the lift.
For vehicles with large aftermarket wheels, also check inner tyre clearance at steering lock and under compression before selecting the final height.
Frequently asked questions for the Discovery 5
Can the height be adjusted without removing the links?
Yes. Opposing left-hand and right-hand threads allow the centre adjuster to be rotated while both sockets remain connected to the vehicle.
Does the kit require coding?
No. The ride-height change is created mechanically and does not require software coding or an electronic lowering module.
Will the original suspension modes remain available?
Yes. The factory controls and selectable suspension modes remain available, although the vehicle operates around the newly selected static height.
Should the alignment be checked?
Yes. A wheel-alignment check is recommended after the vehicle has settled, particularly with a larger drop or non-standard wheels.
Can the original height be restored?
Yes. The links can be readjusted and the original factory links can also be reinstalled.
Global shipping from BaanVelgen
BaanVelgen supplies the Discovery 5 kit worldwide and provides fitment support before and after purchase. The product is developed in Rotterdam and precision-manufactured in Taiwan to BaanVelgen specifications.
